Master class: Roman blinds with their hands

To make Roman blinds is easy — you just have to make time to prepare all the necessary materials and follow our instructions.

What you’ll need:

  • the fabric and lining for curtains;
  • metal or wooden pins in length 3 cm shorter than the width of the curtains, pieces of eight;
  • Velcro across the width of the blinds;
  • drill and screws;
  • chalk or soap for marking;
  • threads and a needle;
  • sewing machine;
  • three cut the cord, each of them needs to be twice as long curtains, and its width should be more based one the length of your curtain;
  • plastic rings;
  • strap-weighting and a wooden bar for hanging curtains;
  • nails and hooks.

The COUNCIL INMYROOM: with self-tailoring to do without Zamo, Bosch. The device lies comfortably in hand, quickly measure any even round objects instantly calculates the area based on the last two measured values.

 

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

The first step

Measure the window opening, these results add another 15 inches for allowances top and bottom of Roman blinds, as well as five inches at the side seams.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

Step two

On the wrong side of the fabric using chalk or a piece of dry soap to mark the location of the rings, the fold lines and tuck.

Ensure that the distance between pleats was identical, otherwise the curtains will turn out with an ugly drape.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

Step three

First treat the lateral edge and the upper edge of the fabric. To the upper cut sew the Velcro-the Velcro that attaches the curtain. Velcro is the most convenient option: to easily remove curtains for washing and hang them back.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

Step four

Tuck the bottom part of the curtains — to create space for the weight bar. Then on the reverse side curtains stitch finishing the edge. In the resulting “pockets” insert slats.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

Step five

By using furniture nails or a stapler, attach to the bottom of a wooden bar Velcro. At it then will be attached curtains.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

Step six

Go to the layout position of the rings. Then sew them manually. On a wooden beam they are fixed with nails to the lifting mechanism was well fixed.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

Step seven

With the help of Velcro, attach the curtain to a wooden beam. Then thread the cord to the top of the curtains through all the rings. Repeat with all the rings. Keep using the top ring cords all came out on one side of the curtains.

Pull the cords as tight as you can — so the pleats will be distributed across the width of the curtains. And fix the cords with cords.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

Step eight

Install wooden beams on the window frame. For this you will need a drill and screws.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

Then remove the ribbon used to fix the pleats. When the curtain goes down, align the tension of all the cords.

Фотография: Прочее в стиле , DIY, Текстиль, Bosch, Наталья Анахина, zamo – фото на INMYROOM

On the cover: design project Anne Crimson

No Comments Yet

Comments are closed